The homemade CNC controller project is coming to a finish and ready for testing. Let me know what you think about the Lexan cover idea. Should I bother with clear covers and if so, should I attempt to bend the plexi or make it using metal angle and separate panels of plastic? Relay schematic used: […]
A few items were done in the CNC room that can now be crossed off the list as done. A cable management port was drilled in the CNC table to pass monitor and cable wire thru. Also, a wooden sliding keyboard and mouse shelf was built on the table holding the homemade CNC router machine. […]
Our guitar amplifier has 3 sound altering effects built in. There are 3 switches to activate these effects on the front of the amp but they are awkward to use while playing. RockTron included 2 – 1/4 foot switch jacks on the back of the unit to activate the effects alternately by using a foot […]
We finish up the multiple monitor stand and then get to work choosing and configuring a Windows computer that will be used to control the CNC router from Mach3. Choosing & Configuring Computer System to Control CNC Router – Running Mach3 The Guru Brew is a weekly entertainment show that is posted on the internet […]
I needed a way to hold 2 monitors that are attached to the computers of the CNC router machines running Mach 3. I decided to make my own stand (bracket) using common hardware parts and this is the result of that build project. Homemade Dual Monitor Bracket From Common Hardware The Guru Brew is a […]
